CURTAIN SLAT
Single skin 76mm (3”) curved steel standard galvanised finish. Wall thickness 0.7mm, 0.9mm, or 1.2mm, depending on overall shutter opening width.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour or Plastisol finish (surcharges apply). View our stocked powder coating colours here and our Plastisol range here.
Visible Surface :: 76mm
Profile Height :: 86.6mm
Weight per m² :: 9.8kg / 12.5kg / 16kg (depending on wall thickness)
Maximum Width :: 12000mm
Maximum Surface :: 72m²
ENCLOSURE / HOUSING
Manufactured from galvanised steel sheet. End caps are fabricated from steel.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies). View our stocked powder coating colours here.
Shutter Height (mm) Plate Size* (mm)
2200 305
3650 355
6000 400
*These sizes apply to standard shutter roll methods only. Reverse rolled curtains will require larger boxes than those shown. Plate sizes shown as a guide only and may increase dependent on shutter width.
GUIDE CHANNELS / BOTTOM SLAT
Galvanised steel section bottom rail: either ‘L’ or ‘T’ shape. Guide channel depth will vary dependent on application, either 50mm, 65mm, 75mm or 100mm. Wind guide option available for 65mm.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies). View our stocked powder coating colours here.
Guide channels are bolted onto angle or box section, depending on the application. See Plan drawings on this sheet.
OPERATION
Electric: GfA Safedrive & Ranger three phase motors with TS959 push button control station as standard. Motors can be direct drive, chain drive or in-line design. Final configuration will be project specific but all motors incorporate a chain manual override facility as standard. Numerous control option variants such as timed closure, group, remote or mobile phone activation. See S76 for single phase tubular motor.