CURTAIN SLAT
Single skin 76mm (3”) curved steel standard galvanised finish. Wall thickness 0.7mm.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour or Plastisol finish (surcharges apply). View our stocked powder coating colours here and our Plastisol range here.
Visible Surface :: 76mm
Weight per m² :: 9.8kg / 12.5kg / 16.7kg (depending on wall thickness)
Maximum Width :: 3000mm
Maximum Surface :: 9m²
ENCLOSURE / HOUSING
Manufactured from 0.7mm or 0.9mm galvanised steel sheet. End caps are fabricated from 3mm steel.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies). View our stocked powder coating colours here.
Shutter Height (mm) Plate Size* (mm)
2695 305
3000 355
*These sizes apply to standard shutter roll methods only. Reverse rolled curtains will require larger boxes than those shown. Plate sizes shown as a guide only and may increase dependent on shutter width.
GUIDE CHANNELS / BOTTOM SLAT
Galvanised steel section bottom rail: either ‘L’ or ‘T’ shape. Guide channel width of 50mm or 65mm.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies). View our stocked powder coating colours here.
Guide channels are bolted onto angle or box section, depending on the application
OPERATION
Manual: A counter-balanced spring and lock assembly is available for shutters up to 9m². A counter-balanced helical ‘loaded shutter’ controlled via hand chain is available for larger applications.
Note: Manual operation is advised for small pedestrian type doorways and window shutters only.
