CURTAIN SLAT
Single skin 76mm (3”) curved steel standard galvanised finish. Wall thickness 0.7mm, 0.9mm, or 1.2mm, depending on overall shutter opening width.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour or Plastisol finish (surcharges apply). View our stocked powder coating colours here and our Plastisol range here.
Visible Surface :: 76mm
Profile Height :: 86.6mm
Weight per m² :: 8.3kg / 10.6kg / 14.2 kg (dependent on wall thickness)
Maximum Width :: 1200mm
Maximum Surface :: 29m² with single phase power or 49m² with 3-phase power.
ENCLOSURE / HOUSING
Manufactured from 0.7mm or 0.9mm galvanised steel sheet. End caps are fabricated from 3mm steel.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies). View our stocked powder coating colours here.
TUBULAR MOTOR:
Guide Height (mm) Plate Size* (mm)
2695 305
4000 355
5000 400
OUTBOARD MOTOR:
Guide Height (mm) Plate Size* (mm)
6000 400
6000 550
*These sizes apply to standard shutter roll methods only. Reverse rolled curtains will require larger boxes than those shown. Plate sizes shown as a guide only and may increase dependent on shutter width.
GUIDE CHANNELS / BOTTOM SLAT
Galvanised steel section bottom rail: either ‘L’ or ‘T’ shape. Guide channel depth will vary dependent on application; either 50mm, 65mm, 75mm or 100mm. Wind guide option available for 65mm guides.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies). View our stocked powder coating colours here.
Guide channels are bolted onto angle or box section, depending on the application.
OPERATION
Electric: Tubular Motor = NRG Econom tubular motor & internal rocker or external key switch as standard (range of other motors available for a surcharge). Safety brake as appropriate to comply with legislation. Manual override facility & crank handle as required (surcharge applies). Numerous control option variants such as group, remote or mobile phone activation.
Outboard Motor = GfA Safedrive & Ranger three phase motors with TS959 push button control station as standard. Motors can be direct drive, chain drive or in-line design. Final configuration will be project specific but all motors incorporate a chain manual override facility as standard. Numerous control option variants such as timed closure, group, remote or mobile phone activation.
Note: Manual operation is available but not common with the V76; manual operation is advised for window shutters only.