CURTAIN SLAT
Single skin 76mm (3”) curved steel.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour or Plastisol finish (surcharges apply). View our stocked powder coating colours here and our Plastisol range here.
Visible Surface :: 76mm
Weight per m² :: 8.3kg, 10.6kg, 14.2 kg (depending on wall thickness)
Maximum Width :: 7000mm (tubular), 12000 (outboard)
Maximum Surface :: 29m² (tubular), 49m² (outboard)
ENCLOSURE / HOUSING
Manufactured from 0.7mm or 0.9mm galvanised steel sheet. End caps are fabricated from 3mm steel.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies). View our stocked powder coating colours here.
TUBULAR MOTOR:
Guide Height (mm) Plate Size* (mm)
2695 305
4000 355
5000 400
OUTBOARD MOTOR:
Guide Height (mm) Plate Size* (mm)
6000 400
6000 550
*These sizes apply to standard shutter roll methods only. Reverse rolled curtains will require larger boxes than those shown. Plate sizes shown as a guide only and may increase dependent on shutter width.
GUIDE CHANNELS / BOTTOM SLAT
Galvanised steel section bottom rail: either ‘L’ or ‘T’ shape. Guide channel depth will vary dependent on application, either 50mm, 65mm (with or without windlocks), 75mm or 100mm.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies). View our stocked powder coating colours here.
Guide channels are bolted onto angle or box section, depending on the application.
OPERATION
Electric: Single-phase tubular motor or 3-phase outboard direct drive motor (dependent on curtain weight) with push button control. Numerous options such as group or remote control etc., available as required. Manual override facility as required.
Note: Manual operation is available but not common with the P76. Advised for window shutters only.