LOCKING MECHANISMS
The S76 incorporates a bullet locking system situated 1 meter from ground level, fixed to each guide channel on all shutters; side anchors inside guide; central ground anchor on the bottom lath on shutters over 3 meters wide.
CURTAIN SLAT
Single Skin 76mm (3”) curved steel.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour or Plastisol finish (surcharges apply). View our stocked powder coating colours here and our Plastisol range here.
Visible Surface :: 76mm
Weight per m² :: 16.7kg
Maximum Width :: 7000mm
Maximum Surface :: 18m² (tubular motor) / 49m² (outboard motor)
ENCLOSURE / HOUSING
Manufactured from 0.8mm steel sheet. End caps are fabricated from steel plate.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies). View our stocked powder coating colours here.
TUBULAR MOTOR:
Guide Height (mm) Plate Size* (mm)
2250 355
3000 400
4000 450
5000 500
6000 550
OUTBOARD MOTOR:
Guide Height (mm) Plate Size* (mm)
3000 400
4000 450
5000 500
6000 550
6000 600
*Plate sizes shown as a guide only and may increase dependent on shutter width.
Note: External motor applications will require plate and enclosure sizes specific to each job.
GUIDE CHANNELS / BOTTOM SLAT
Galvanised steel section bottom rail in ‘T’ shape. Guide channels are 65mm wide with wind locks. They are bolted onto angle for face fixed installations, or to 5mm wall box section for reveal fit (fixings supplied with shutter).
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies). View our stocked powder coating colours here.
OPERATION
Electric: Tubular Motor = NRG Econom tubular motor & internal rocker or external key switch as standard (range of other motors available for a surcharge). Safety brake as appropriate to comply with legislation. Manual override facility & crank handle as required (surcharge applies). Numerous control option variants such as group, remote or mobile phone activation.
Outboard Motor = GfA Safedrive & Ranger three phase motors with TS959 push button control station as standard. Motors can be direct drive, chain drive or in-line design. Final configuration will be project specific but all motors incorporate a chain manual override facility as standard. Numerous control option variants such as timed closure, group, remote or mobile phone activation.
