LOCKING MECHANISMS
The Steelroll i100 incorporates a bullet locking system situated 1 meter from ground level, fixed to each guide channel; side anchors inside guide; central ground anchor on the bottom lath on shutters over 3 meters wide. Lock isolator kits available to prohibit operation of the shutter while in the locked condition.
CURTAIN SLAT
Double skinned mild steel insulated slat with 81mm face and optional insulated core. Wall thickness 1.2mm. Concealed reinforcement bars and security end locks fitted.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour or Plastisol finish (surcharges apply). View our stocked powder coating colours here and our Plastisol range here.
Visible Surface :: 81mm
Profile Height :: 100mm
Weight per m² :: 100kg
Maximum Width :: 3000mm (tubular), 7000mm (outboard)
Maximum Surface :: 4m² (tubular), 35m² (outboard)
ENCLOSURE / HOUSING
Housing manufactured from steel sheet. End caps are fabricated from steel plate.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies). View our stocked powder coating colours here.
TUBULAR MOTOR:
Guide Height (mm) Plate Size* (mm)
1750 400
2500 450
OUTBOARD MOTOR:
Guide Height (mm) Plate Size* (mm)
1750 400
2500 450
3250 500
4000 550
5000 600
*Plate sizes shown as a guide only and may increase dependent on shutter width.
GUIDE CHANNELS / BOTTOM SLAT
Guide channels are 85mm reinforced wind guides.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies). View our stocked powder coating colours here.
OPERATION
Electric: Outboard Motor = GfA Safedrive & Ranger three phase motors with TS959 push button control station as standard. Motors can be direct drive, chain drive or in-line design. Final configuration will be project specific but all motors incorporate a chain manual override facility. Numerous control option variants such as timed closure, group or mobile phone activation.